Aluminium Oxide for Car Paint Polishing in our company adopts a unique rigorous production process and advanced production equipments.
Naš aluminijev oksid za poliranje avtomobilov ima naslednje vrhunske lastnosti:
●Stable crystal phase, high hardness, small particles and uniform distribution;
●Strong grinding force, fast polishing, bright luminosity and good mirror effect;
●High grinding efficiency and good polishing effect. The grinding efficiency of Aluminium Oxide Automative Polishing is much higher than that of soft abrasives such as silicon dioxide. The surface finish is better than the polishing effect of white corundum. The cutting force is strong;The light is fast, and with uniform and bright shine.
The specification of Aluminium Oxide Automative Polishing
PRODUCT NAME | OCENA | POLIRAN | PARTICLE SIZE (µm) | PRIJAVA |
AMBR-621 | Coarse Cut | Very Coarse Finish | D50: 22 - 32 | First Cut Abrasive for High Stock Removal |
AMBR-623 | Srednje rez | Coarse Finish | D50: 4 - 5.5 | First Cut Abrasive for Medium Cut Stock Removal |
AMBR-624 | Medium Cut | Coarse Finish | D50: 5.0 - 8.0 | First Cut Abrasive for Medium Cut Stock Removal |
AMBR-626 | Fina ocena | Fine Finish | D50: 1.5 - 3.0 | Second Step/Final Step Abrasive |
PG serija | Fine Grade | Very Fine Finish | D50: 0.4 - 1.5 | Abraziv za zadnji korak |
Artikel | podatkov | |||
Vrsta | PG-3 | PG-5 | PG-8 | PG-10 |
Videz | Bel prah | |||
Crystal |
|
|
|
|
vsebino﹪ ＞ | 99,9 odstotka | 99,9 odstotka | 99,9 odstotka | 99,9 odstotka |
Srednja velikost delcev D50 | 0.3um | 0.5um | 0.8 um | 1.0um |
Povprečna velikost delcev in porazdelitev aluminijevega oksida za poliranje avtomobilov: Different polishing processes of Aluminium Oxide Automative Polishing are determined according to the average particle size. Generally, the particle size of 20-45μm is used in the rough polishing process, the particle size of 4-20μm is used in the middle polishing process, and the particle size of 1-4μm is used in the polishing process. Polishing process, 1μm or less is used for mirror polishing. The narrower the particle size distribution, the higher the polishing efficiency.
Quality of Aluminijev oksid za poliranje avtomobilskih barv:
Glavna dejavnika, ki določata kakovost aluminijastega polirnega prahu, sta porazdelitev velikosti delcev mikropraha in mikroskopski videz delcev.
Največja velikost delcev določa natančnost poliranja polirnega praška, povprečna velikost delcev pa hitrost poliranja polirnega praška.
Morfologija delcev aluminijevega mikropraha vpliva na hrapavost in pomanjkljivosti pri poliranju polirane površine. Delcev z gladko površino ni enostavno opraskati, površinska obdelava po poliranju pa je visoka; delce z ostrimi robovi in vogali je enostavno opraskati.
Za barvo vašega avtomobila izberite Avtomatsko poliranje z aluminijevim oksidom.
Application of polishing aluminium oxide powder:
Poliranje aluminijevega oksida v prahu V glavnem se uporablja v industriji namiznega pribora, industriji nakita, avtomobilskih delih, optičnih lečah, strojih in električnih pripomočkih ter drugih industrijah, ki zahtevajo površinsko obdelavo.
Kristalna trdota: temperatura kalcinacije za pripravo prahu aluminijevega oksida mora biti visoka, običajno nad 1600, da se zagotovi dobra trdota izdelka.
Velikost in oblika enega kristala: Velikost posameznega kristala določa debelino površinske teksture poliranega izdelka, ki je ni enostavno očistiti. Okrogli ali ovalni kristali zlahka oddajajo črno svetlobo, rombični kristali zlahka oddajajo rumeno in belo svetlobo, kosmiči ali kosmičasti kristali pa zaradi slabe sile mletja ne oddajajo svetlobe.
Priljubljena oznake: Avtomatsko poliranje z aluminijevim oksidom, dobavitelji, proizvajalci, lastnosti, cena, življenjska doba, uporabe, prah, vrste, proizvodnja, regeneracija, nakup, MSDS, koda HS